DOT Marking Machine (C-135-85)

The marking area of this machine is 135mm X 85mm.

Features:

The machine should be controlled by Computer and Air Compressor.

You can key in whatever you want to mark in the Computer with the help of our English software, which is designed by ourselves, with strong-editing and easy to use.

And under the application of Air Compressor, the marking pin will strike on work pieces at a high frequency to form needed information.

For this set of marking machine, there is one marking cable about 10 meters connected with Main Machine and Marking Controller to finish the marking through away the Computer and the Controller.

It is usually used to make marking on vehicle bodya, frame, base plate, vehicle rear axle, pillar,

Engine, and other heavy and large products.

Techinical parameters of the machine:
Marking content: Letter, numbers, vector graphs, serial codes, VIN codes and so on
Size of the content: Adjustable
Marking speed: 1-4 letters per second
Marking material: Metals or non-metals with hardness under HRC 55
Marking depth: 0.02-1mm (adjustable, relevant to material)
Repeat Presision: 0.02-0.05
Power source: AC 220V 50 Hz or AC 110V, 50 Hz
Energy consumption: 100W (air compressor and computer exculded)
Pneumatic pressure: 0.3-0.7MPa
Atmosphere consumption: 25-120L/min